![]() With Linux and ZFS, QuTS hero supports advanced data reduction technologies for further driving down costs and increasing reliablility of SSD (all-flash) storage. QuTS hero is the operating system for high-end and enterprise QNAP NAS models. WIth Linux and ext4, QTS enables reliable storage for everyone with versatile value-added features and apps, such as snapshots, Plex media servers, and easy access of your personal cloud. I f you can Hear Two Beeps, Please follow my other documents.QTS is the operating system for entry- and mid-level QNAP NAS. To fix this problem, please follow “Qnap firmware Recovery / Reflash” Documents. If you cannot Hear the two beeps, the NAS Firmware is Damaged. If you cannot hear first beep, Please contact your local reseller or distributor for repair or replacement service. You will hear a beep after pressing the power button, followed by 2 beeps 2 minutes later. ![]() I take this document from Qnap helpdesk, It continues with “send it to technical departmant”, but you can solve it by yourself, so please keep on reading my fixed document If you still cannot access the NAS after Step 3, please do the following: This will clear the administrator password and network settings (DHCP will be used and the default user name and password is: admin/admin).After two beeps on the system startup, run the Finder again to find your NAS or open a web browser and enter (If your NAS is connected to your PC directly, the NAS IP is 169.254.100.100:8080). Reset the NAS by pressing the reset button for 3–4 seconds.If the Status/Power LED flashes red or red and green alternatively, the NAS is not initialized or the hard drive(s) are not ready. Check if the Status LED (same as the Power LED for some models) glows green.Check your LAN cable connection and the LAN LED is flashing. If your NAS is not connected to the internet, you can use Qfinder Pro to find your NAS over LAN for installing firmware.If you still cannot access your NAS by the Finder or by entering the NAS IP in the web browser directly, please do the following: ![]() If the problem persists, check if other anti-virus programs or firewalls are running disable them and run the Finder again. Everything was working fine and I was able to connect to the NAS successfully over the network. That switch has one port leading to the internet and another port connected to a MacBook running Qfinder Pro. Windows 7 users can click “Allow access” to unblock the Finder from Windows Firewall. 1 I have a Qnap NAS connected to Qnap QSW-M2108-2C managed switch. If you are using Windows XP SP2, click “Unblock” when the Windows Firewall dialog appears to run the Finder. Uncheck the option “Internet Connection Firewall”.Click “Properties” and select “Advanced” tab.Click “Network Connections” and double click the icon for your network connection.Go to “Control Panel” > “Network and Internet Connections” in the Category view or go to “Network Settings” > “Control Panel” in the Classic view. Qfinder Pro finds and displays all the QNAP NAS that are reachable on the same LAN, providing you with effortless centralized access and management.(Source: NAS Master) Sometimes technology has a tendency to not work as intended. How to troubleshoot connecting to your QNAP NAS Widgets in QNAP QTS 5. (There’s also the Qfinder Pro you can download.) Enter your account credentials and hit Log in. If you are using Windows XP SP1, please do the following: Go to your PC and enter the IP of the enclosure. Make sure your NAS and the PC are connected to the network correctly.
0 Comments
Leave a Reply. |